Click to Share

Automatic Oil Breakdown Voltage tester

Fully Automatic Oil Dielectric Breakdown Voltage test set PE-AOBDV-1 has Accuracy of 1% and Resolution of 0.01kV. Touch-screen big LCD & Thermal printer is integrated. ASTM/IEC/IS/BS/SABS standards arepre-programmed, and 9 custom tests included

Manufacturer - Oil Testers - Power Electronical
Model # - PE-AOBDV-1
Submitted By - Power Electronical (Manufacturer, Service Provider)
Country - India
Category - Engineering : Test & Measurement : Oil Testing

Contact   |   Link To Product   |   More Products By This Company


Accuracy :   1%
Resolution :   10V
Voltage ramp rate :   0.5kV/sec to 5kV/sec
Current trip :   5mA to 20mA
ASTM, IEC, BS tests :   included


Automatic Oil Breakdown Voltage Tester

Oil has been used for a long time as an insulating medium in Transformers and OLTC. It is also an effective coolant and transfer medium of various impurities from windings and paper insulation. It is necessary for Oil to be a perfect insulator as it was intended to be at the time of manufacture, for the HV equipment to function satisfactorily.. But oil suffers from electrical degradation due to the contaminations and other electrical and mechanical stresses, rendering its properties ineffective for its intended purpose after sustained period of operation. Dielectric Breakdown Voltage testing of Oil is one such means to detect the voltage at power frequency at which it is likely to cause a flash‐over.
PE‐AOBDV‐AM series of Automatic Oil Breakdown Voltage Testers are highly precise instrument, which can be used to conduct either a breakdown voltage test or do a proof (withstand) test. Usual available automatic test sets only perform the former function, but PE-AOBDV‐AM can do both.

‐ Available in 100kV (M100), 80kV (M080) and 60kV (M060) versions.
‐ World’s only “True BDV set”…measures HV secondary voltage across Oil vessel electrodes, instead of across HV primary
‐ Complete Automatic operation. Just select and Start!
‐ “Most accurate test set”. 1% Accuracy. 0.01kV resolution
‐ Programmable Stand, Stir and Intermediate stand times from 0‐100 min
‐ Programmable voltage ramp rate from 0.5kV/sec to 5kV/sec to meet requirements of all regional standards
‐ Proof test possible with 5 break sequences
‐ Repetitive test sequence (up to 99 iterations)and average readings (from first to last)
‐ Non‐contact magnetic stirring
‐ User and object information included
‐ Touch panel, Backlit color LCD screen for comfortable user interface
‐ Integrated thermal Printer
‐ Vacuum cast resin HV transformer designed for min 100K test cycles
‐ Internal memory for 100 test data storage and recall via USB port
‐ Included IEC 60156, ASTM D877, ASTM D1816, UNE 21, BS 5730a, BS 148, BS 5874, VDE 0370, NFC 27, CE1344, OCT 6581, SABS 555, AS 1767, STA 8286, IP 295 standard test sequences
‐ Programmable 5 custom test sequences as per requirement
‐ High Voltage 100kV digital meter 1% accuracy available for on‐site calibration


, , , , , , , , ,

Disclaimer: Submitters of product listings are solely responsible for their content. PRLog can't be held liable for the contents of the product listings.   Report Abuse

Like PRLog?
Click to Share