Click to Share

Model 4337 Digital Signal Conditioner for Strain Gauge Sensors

Model 4337 Digital Signal Conditioner connects to a strain gage transducer and generates a serial output for connection to a PC, a scalable +/- 10V analog output for interface to data acquisition systems, and a 16-character auto ID display.

Manufacturer - Electro Standards Laboratories
Model # - 4337
SKU - 304337
Submitted By - Electro Standards Laboratories (Manufacturer)
Country - United States
Category - Other : Signal Conditioner : Digital

Contact   |   Link To Product   |   More Products By This Company


Click on an image to see larger size image ...

CellMite Model 4337 Digital Signal Conditioner


Excitation Voltage :   5VDC
Excitation Nom. Load :   350 ohm bridge
Internal Resolution :   24-bit
Input Range :   +/-5.5mV/V (std)
Conversion Rate :   60/sec.
Error :   0.01%, +/-1 count
Pushbuttons :   Tare, Shunt
Precision Shunt :   60K ohms
Indicator :   Status LED
Display Range :   +/-999999.


CellMiteĀ® 4337 with Auto Identifying Display Complete Digital Conditioner for Strain Gauge Sensors

Powerful load cell electronics!

The CellMite Model 4337 with auto identifying display is a digital signal conditioner that connects directly to a standard strain gage transducer and simultaneously generates a serial output for direct connection to a PC, a scalable +/- 10V analog output for interface to data acquisition systems, and a 16-character auto identifying display for direct readout viewing.

The Model 4337 has on-board storage for 3 calibrated sensors, each with integrated 6-point calibration and independent user specified display setup parameters. When a TEDS-Tag capable sensor is connected to the unit, that sensor is immediately identified by the Model 4337 and its stored calibration data and display configuration are automatically loaded. If that sensor is removed and another TEDS-Tag sensor is connected, then its calibration data and display data are automatically loaded.

Unlike other units in its class, auto sensor identification and auto display identification require no user intervention and prevent field personnel from making costly mistakes due to incorrect sensor calibration or display setup.

The CellMite Model 4337 can be fully operated with a computer or simply setup by a computer and then used as a stand-alone intelligent digital signal conditioner with auto-identifying analog and alphanumeric display outputs.

The CellMite Model 4337 integrates an intelligent 16-character backlit alphanumeric display with a CellMite Model 4325B. The wide range numerical readout features 6 digits of display plus sign indicator and decimal point along with a unit of measure label and channel identifier. The Model 4337 automatically converts between a variety of scientific units including Lbs, Kg, In, cm, mm, and mV/V and can output these to the display. The location of the decimal point and unit of measure are setup via software but the computer is not required during operation.

The CellMite Model 4337 has a multi-drop RS232/RS485 serial port that allows for connection of multiple units in a serial network configuration. This compact unit is ideally suited for in-situ transducer conditioning and distributed process measurements. It provides OEM users and system integrators with an affordable and complete strain gage-to-PC solution with intelligent display readout that is not found on competitive units.

The CellMite Model 4337 features include nonvolatile memory for parameter and calibration storage, the ability to select between three stored calibrations, automatic sensor identification using TEDS-Tag technology, solid state relay switches, multi-point and mV/V calibration, remote sense excitation, and 24-bit internal resolution with 16-bit analog output.

When used in combination with the Electro Standards Laboratories CellView family of point-and-click GUI (Graphical User Interface) software, a turnkey data acquisition system is formed that can generate Excel compatible data files. The software also supports multiple units in a serial data network configuration and mix and match operation with the Electro Standards Laboratories Model 4331-200 two-channel CellMiteĀ® LVDT embedded digital signal conditioner boards. This allows the construction of mixed DC excited and AC excited sensor networks under a single software umbrella.

CellMite 4337 Features:

Auto Identifying Display
2-pt mV/V Calibration
6-pt Linearization Calibration
Scalable +/-10V Analog Output
16-bit Analog Output
Direct to PC with RS232 Data
24-Bit Resolution
Multiple Filter Selections
Storage for 3 Calibrated Transducers
Remote Sense Excitation
Addressable for Serial Network
Tare, Peak, Valley
Unit Support: Lb, Kg, N, In, cm, mm, %, mV/V, User Defined
TEDS-Tag Auto Identification
Power Supplies Internally Isolated

Graphical User Interfaces and Software Drivers sold separately. Select from:
CellView Lite GUI (Cat. No. 514569)
CellView Multi-Display (Cat. No. 514424)
CellView with Graphing GUI (Cat. No. 514358)
Software Driver (Cat. No. 514864)

CellMite 4337 Specifications:

Voltage: 5VDC
Nom. Load: 350 Ohms Bridge

Internal Resolution: 24-bit.
Input Range: +/-5.5mV/V (std)
Conversion Rate: 60/sec.
Error: 0.01%, +/-1 count
Pushbuttons: Tare, Shunt
Precision Shunt: 60K Ohms
Indicator: Status LED
Display Range: +/-999999.

Analog: 16-bit, Scalable, +/-10V.
Serial Data: Multidrop, RS232, RS485
Switches: Dual solid state relays
Display: 16 Character backlit LCD

Power: Included Adapter: 5 VDC, 0.5A

Size: 5.5" x 4" x 1.5"
Weight: 11.4 Oz., (323g)


, , , , , , , , ,

Disclaimer: Submitters of product listings are solely responsible for their content. PRLog can't be held liable for the contents of the product listings.   Report Abuse

Like PRLog?
Click to Share