Click to Share

Model 7199 4-Channel BNC A/B Switch with RS485 Remote Control

The Model 7199 is a 4-Channel BNC A/b Switch with RS485 Remote that allows each channel access to two BNC networks from one Common BNC network or device.

Manufacturer - Electro Standards Laboratories
Model # - Model 7199
SKU - 307199
Submitted By - Electro Standards Laboratories (Manufacturer)
Country - United States
Category - Network Switch : A/B Switches : BNC Connectors

Contact   |   Link To Product   |   More Products By This Company


Click on an image to see larger size image ...

M7199 4-Channel BNC A/B Switch with RS485 Remote


Port Connectors :   (3) BNC (F) connectors
Display :   (8) Front panel LED's
Remote :   (1) DB9 female
Power :   UL approved 120VAC, 60 Hz wall mount
Configuration :   Rackmount


The PathWay® Model 7199 BNC A/B Data Switch with RS485 Remote allows the user the capability of sharing a single BNC interface device connected to the Common port among two other devices connected to the A and B ports for each channel. There are no local or front panel switch controls on the unit. The Model 7199 can ONLY be switched remotely from the DB9 RS485 serial interface remote port located on the rear of the unit.

Model 7199 Features:
- Each channel allows access to two BNC networks from one COMMON BNC network or device.
- Four independent switch channels may be switched individually or simultaneously.
- The center pin of the BNC interface is switched only. The shells of the BNC interface are tied together and separated by channel.
- No front panel pushbutton control.
- Remote port designed for RS485 multi-drop applications.
- Remote RS485 ASCII commands that allow the user to control switch position and obtain switch status.
- Front panel LED's display switch position and power status.
- Retains last switch position in the event of power loss and continues to pass data.
- Attractive anodized black box packaging provides EMI/RFI shielding.

Model 7199 Specifications:
PORT CONNECTORS: (3) BNC (F) connectors labeled A, B, and COMMON for each channel.
DISPLAY: (8) Front panel LED's display switch position and power status.
REMOTE: (1) DB9 female connector on rear panel accepts RS485 ASCII commands for Remote Control Operation.
POWER: UL approved 120 VAC, 60 Hz wall mount power module supplies 12 VDC, 500mA to the unit.
DIMENSIONS: Rackmount 19.0" W x 1.75" H x 10.0" D
(48.3 x 4.4 x 25.4 cm), (1U rack height).
WEIGHT: Approximately 5.5 lbs (2.5 Kg)


, , , , , , , , ,

Disclaimer: Submitters of product listings are solely responsible for their content. PRLog can't be held liable for the contents of the product listings.   Report Abuse

Like PRLog?
Click to Share