Click to Share

QuickSwitch Model 6197 All Fiber Optic LC Duplex A/B/C/D Switch w/ RS232 Remote

QuickSwitch Model 6197 is a Single Channel All Fiber Optic LC Duplex ABCD Switch with RS232 Remote that allows access to any one of four separate fiber optic networks from one computer.

Manufacturer - Electro Standards Laboratories
Model # - 6197
SKU - 306197
Submitted By - Electro Standards Laboratories (Manufacturer)
Country - United States
Category - Fiber Switch : A/B/C/D Switch : LC Duplex

Contact   |   Link To Product   |   More Products By This Company


Click on an image to see larger size image ...

Model 6197 Fiber Optic LC Duplex A/B/C/D Switch


Wavelength :   850 nm
Port Connectors :   (5) LC Duplex female
Control :   (1) Pushbutton
Display :   (4) Red LED's
Remote :   (1) DB9(F) accepts ASCII RS232 Serial Data
Power :   UL approved 120 VAC, 60Hz wall mount power module


The QuickSwitch® Model 6197 Single Channel LC Duplex A/B/C/D Switch with RS232 allows the user the capability of sharing a single port interface device connected to the COM port among four other devices connected to the A, B, C, and D ports with remote access functionality.
The switch may be controlled locally by manually operating the front panel pushbuttons or remotely from the DB9 Remote Control port located on the rear of the unit. The Remote port provides control through RS232 serial commands and allows the user to both control and monitor the switch position and unit power status.

- Access any one of four separate fiber optic networks from one computer.
- Internal circuitry insures isolation between networks/devices.
- MEMS-based mirror/prism switch technology supports Gigabit data rates.
- Insertion losses are less than 1.0 dB.
- Service protocol transparent.
- Optical data throughput scalability.
- All fiber ports are LC duplex, multimode, 50/125 micron and support a wavelength of 850 nm.
- Eliminates need to plug/unplug fiber optic patchcords.
- Local control via front-panel pushbutton.
- Remote control port allows off-site monitoring and switch management.
- The remote port accepts RS232 Serial Data commands for switch position control and monitoring.
- Front-panel pushbutton control can be locked out, remotely
- Front-panel LED's display switch position and power status.
- Retains last switch position in the event of power loss and continues to pass data.
- Custom length rigorously tested and certified, LC fiber optic cables available for your switch installation.

PORT CONNECTORS: (5) LC Duplex female connectors labeled A, B,C, D, and COMMON.
CONTROL: (1) Pushbutton allows selection of switch position.
DISPLAY: (4) Red LED's display switch position and power status.
REMOTE: (1) DB9(F) connector on rear panel accepts ASCII RS232 Serial Data for Remote Control operation.
POWER: UL approved 120VAC, 60Hz wall mount power module supplies 12VDC, 500mA to the unit. (Cat No. 516682)
DIMENSIONS: Standard rackmount, 19.0"W x 1.75" H x 8.0" D.
(48.3 x 4.4 x 20.3 cm)
WEIGHT: Approximately 4.5 lbs (2.0 Kg)


, , , , , , , , ,

Disclaimer: Submitters of product listings are solely responsible for their content. PRLog can't be held liable for the contents of the product listings.   Report Abuse

Like PRLog?
Click to Share