Click to Share

AE Techron 7224 Amplifier

The 7224 offers the power & features of larger industrial amplifiers in a small 2U size that runs from single phase 120/230VAC. It offers DC - 300 kHz bandwidth, controlled current or controlled voltage operation and many field configurable options.

Manufacturer - AE Techron, Inc.
Model # - 7224
Submitted By - AE Techron, Inc. (Manufacturer)
Country - United States
Category - Electronics : Amplifier : Linear, DC-enabled

Contact   |   Link To Product   |   More Products By This Company


Frequency Response :   DC - 300 kHz
DC Output @ 13.5V :   20A
DC Output @ 24 V :   26A
Voltage Output, Peak :   158V, 16-ohm load
Power Output, RMS :   1108 watts, 8-ohm load


The AE Techron 7224 amplifier is a 1 kVA, DC-enabled unit that provides exceptional versatility and value. It features DC to 300 kHz bandwidth and offers a wide range of field-configurable options. A single 7224 can output a 40 mSec pulse with up to 52 amperes peak current. In continuous operation, a 7224 can provide 1,100 watts RMS of output power. If more current or power is needed, up to four amplifiers can be combined in series or parallel and operate as a single system.
The 7224 can operate in either voltage or current mode and can be configured by the customer for high-voltage/low-current, medium voltage and current, or low-voltage/high-current applications. It provides very low noise and fast slew rates, and can safely drive a wide range of resistive, inductive loads.
The 7224 is typically used to create waveforms found in EMC standards like CS2009, DO-160, MIL STD 461, and as a gradient amplifier for very small bore, high-gain MRI and NMR systems.

• Frequency bandwidth of DC to 300 kHz at rated power.
• Continuous output of over 1,100 watts RMS at 4 ohms.
• 40 mSec pulses of up to 52 amperes peak into a 0.5 ohm load.
• System output of over 4,000 watts or over 200 amperes maximum are possible with multiple, interconnected amplifiers.
• Efficient design and light weight chassis materials allow amplifier to occupy only 2U height and weigh only 41 lbs.
• Protection circuitry protects the AE Techron 7224 from input overloads, improper output connection (including shorted and improper loads), over-temperature, over-current, and supply voltages that are too high or low.
• Shipped ready to operate from 120-volt (±10%) single-phase AC mains. 220/240-volt model available on request.


, , , , , , , ,

Disclaimer: Submitters of product listings are solely responsible for their content. PRLog can't be held liable for the contents of the product listings.   Report Abuse

Like PRLog?
Click to Share