SBC6020 Atmel SAM9G20 Single Board Computer

Embest SBC6020 Single Board Computer is based on the Atmel AT91SAM9G20 microprocessor and features 2 Ethernet and 7 Serial ports, targeted for high performance embedded industrial applications with high constraints on power consumption.

Contact   |   Link To Product   |   More Products By This Company

Specifications

Details

Embest SBC6020 Single Board Computer is based on the Atmel AT91SAM9G20 microprocessor which contains an ARM9 core with built-in Ethernet MAC and seven Serial ports, targeted for high performance embedded industrial applications with high constraints on power consumption.

Embest SBC6020 Single Board Computer exposes all features of the AT91SAM9G20 microprocessor and supports many standard interfaces and peripheral devices including USB Host/Device, Ethernet, CAN, SPI, Serial ports, CF card slot, ADC, JTAG, GPIO, Mini-PCIe interface and more over. The Mini-PCIe interface has integrated SDIO, SPI, UART and USB signals. Customer can attach 3G module, GPS module, GPRS/GSM module and WiFi/Bluetooth module to this interface.

The board is capable of supporting Linux 2.6.30 open-source operating system. The system can boot from either Nand Flash or Nor Flash. It is pre-installed with the U-Boot boot loader. Embest provides all drivers in source code and together with user manual and some other tools and documents to help customer immediately start with their code development. It is an already device which can be used directly by customers for their embedded applications.

Features
- Dimensions: 150mm x 106mm
- Power supply: +12V
- Working temperature: -10~70°C
- Processor: Atmel AT91SAM9G20 (ARM926EJ-STM core with MMU capable of 400MHz operation)
- 64Mbyte SDRAM
- 128Mbyte Nand Flash (support up to 256Mbyte, bootable)
- 4Mbyte Nor Flash (bootable)
- 2Kbit EEPROM
- 2 10M/100M Ethernet ports
- 7 serial ports (Debug: 3-wire RS232 serial port, COM0: 5-wire RS232/TTL serial port, COM1: 5-wire RS485 serial port, COM2: 5-wire RS232/TTL serial port, COM3/4/5: 3-wire RS232/TTL serial port)
- 2 USB2.0 full-speed (12 Mbits/S) Host ports
- 1 USB2.0 full-speed (12Mbits/S) Device port
- 1-channel CAN2.0 Bus
- 4-channel 10-bit ADC
- RTC (battery backed)
- CF card socket
- Mini-PCI interface (SDIO, SPI, COM2 and USB Host are led out through this interface)
- Buzzer
- LEDs
- 1 Reset button
- Watchdog timer
- 8 GPIOs (can be used as 4*4 keyboard or independent IOs)
- 20-pin JTAG interface
- Supports for Linux2.6

Tags

atmel sam9g20, sam9g20, atmel board, 2 ethernet, at91sam9g20, arm9 board, single on module, atmel CAN, atmel UART, arm processor