DevKit3250 NXP LPC3250 Evaluation Board

Embest DevKit3250 Evaluation Board is using NXP's LPC3250 microprocessor which is built around a 90-nm, 266MHz ARM926EJ-S CPU core, designed for applications that require high performance, high integration, and low power consumption.

Contact   |   Link To Product   |   More Products By This Company

Specifications

Details

Embest DevKit3250 Evaluation Board is deisgned based on Mini3250 processor card using NXP's LPC3250 microprocessor which is built around a 90-nm, 266MHz ARM926EJ-S CPU core and a Vector Floating Point (VFP) coprocessor, designed for applications that require high performance, high integration, and low power consumption.

The CPU core board Mini3250 on Devkit3250, measuring only 75mm by 55mm, has integrated LPC3250 ARM926EJ core and provided Multiple Storage Media including 64MB SDRAM, 128MB bytes NAND FLASH, 4MB Nor Flash. It also supports SD card and USB mass storage devices and has one power indicating LED, one programmable LED and one 40 pin TFT-LCD connector on board. It connects to Devkit3250 expansion board through two 2.0mm pitch 3-line 27-pin connectors. The expansion board has increased the core board's I/Os capabilities. It brought out 8 UARTS, IrDA, Ethernet, Audio, ADC, RTC, Buzzer, Keys, EMC Bus and GPIOs.

The DevKit3250 board is preloaded with ready-to-run Linux OS. Embest offers Linux 2.6.27 BSP and all necessary documents and accessories with this Kit to effectively help with customer's early development work. It can be also used directly into customer's next design.

Features

- Dimensions: 75mm x 55mm (CPU board Mini3250, 8 layer PCB design),
- 165mm x 115mm (Expansion board)
- Power Supply: DC Jack, +9V~+12V DC Input, Power Pin (Optional)
- Working Temp.: -10~70°C
- NXP LPC3250 processor (Compatible with NXP LPC3220/LPC3230/LPC3240 processors)
- 64MByte SDRAM
- 128MByte NAND Flash
- 4MByte Nor Flash
- One 40-pin LCD interface (with touch screen interface)
- One Micro SD Card slot
- One USB OTG 2.0 connector, mini-B type, with ESD protection
- 4 x RS232 UARTs, DB9 Connector; TTL lead out with Pin Array (Optional)
- 4 x TTL UARTs, lead out with Pin Array
- 1 x IrDA
- 24 Bit Address Bus and 16 Bit Data Bus, CS, Reset, Read/Write, INT Signal
- 10/100Mbps, RJ45 connector with LED
- I2C Type 2Kbit EEPROM
- One Reset Button
- Four Programmable Buttons connecting with pin array
- Three ADC Phoenix Terminal Interfaces
- One 3.5mm Stereo Phone Jack
- One 3.5mm Mic Jack
- One 20-pin 2.54mm pitch JTAG interface
- 23 IO Pins, including I2C, SPI, PWM etc.
- RTC with Lithium Battery CR2032
- One buzzer
- Power Indicating LED
- Supports for Linux2.6

Tags

lpc3250, lpc3000, nxp lpc3000, nxp board, ARM board, linux board, 8 uart, lpc3250 datasheet, arm926, development board