Click to Share

Model 7267 2-Channel RS232/RS530 AB Switch, Contact Closure Remote

Model 7267 RS232/RS530 switch supports (2) channels of A/B switch function. The unit simultaneously switches both channels between positions A and B.

Manufacturer - Electro Standards Laboratories
Model # - 7267
SKU - 307267
Submitted By - Electro Standards Laboratories (Manufacturer)
Country - United States
Category - Network Switch : A/B Switches : RS232/RS530 Switch

Contact   |   Link To Product   |   More Products By This Company


Click on an image to see larger size image ...

Model 7267 2-Channel RS232/RS530 AB SwitchCables for Model 7267 and other applications


(6) DB25 Connectors :   A1, B1, COMMON 1, A2, B2, COMMON 2
Front Panel Controls :   Manual pushbutton
DB15 Remote Control :   Accepts Contact Closure Commands
Local Display LEDs :   (2): Switch Position, Power Presence
Switch Position :   Open/close signals on remote connector
Power Jack :   Accepts 48 Volt DC input.
Dimensions :   1.75" H x 19.0" W x 10.0" D
Weight :   Approximately 4 lbs.


Path Way® Model 7267 Dual Channel RS-232 / RS-530 A/B Switch with Remote Control via Contact Closure

The PathWay® Model 7267 network switch provides simultaneous switching of two DB25 channels in a low profile, 19-inch wide, 1U high, rackmount unit. This switch allows two devices connected to the A and B ports of channel one to be shared with a single device connected to the chananel's COMMON port while, simultaneously, allowing two devices connected to the A and B ports of channel two to be shared with a single device connected to that channel's COMMON port.

The switch position can be controlled by either the front panel pushbutton or through the remote control port on the rear panel. The current switch position is displayed by front panel LEDs and is also indicated by signals on the remote control port. The unit retains its current switch position and signal path continuity even in the event of power failure.


Supports (2) channels of A/B Switch function.
M7267 AB data switch provides simultaneous switching of both channels between positions A and B.
Remote switching via contact closure of specified pins of DB15 remote port on rear panel.
Local switching via a front panel pushbutton.
All 25 pins of the DB25 interface of each channel are switched.
All (6) DB25 female ports are located on the rear panel: (2) A , (2) B, (2) COMMON.
Status LEDs indicate the switch position and power status.
Switch maintains switch position and continues to pass data in event of power loss.
Unit mounts in standard 19" equipment rack, 1U space.
Power requirement 48 Volt DC. (not included with unit)


(6) DB25 female connectors:A1, B1, COMMON 1, A2, B2 and COMMON 2.
Front Panel Controls: Manual pushbutton.
Remote Control: DB15 female connector on rear panel accepts contact closure.
Local Display: (2) LEDs on front panel display switch position and power present.
Remote Display: Switch position indicated by signals, open/close, on remote connector.
Power: Power Jack on rear panel accepts 48 Volt DC input. Power supply not included with unit.
Dimensions: 1.75" H x 19.0" W x 10.0" D.
Weight: Approximately 4.0 lbs.


, , , , , , , , ,

Disclaimer: Submitters of product listings are solely responsible for their content. PRLog can't be held liable for the contents of the product listings.   Report Abuse

Like PRLog?
Click to Share