Click to Share

HP ED495AA Power Adapter

Input: AC100-240V (worldwide use) Output: DC 19V 4.74A Power: 90W Connecter size: Internal Diameter: 5.0mm External Diameter: 7.4mm With smart-pin inside

Manufacturer - Hewlett-Packard
Model # - ED495AA
SKU - 93-11070-502
Submitted By - feevoo co. (Reseller, Reseller)
Country - United States
Category - Accessories : Laptop Accessories : Laptop AC Adapter

Contact   |   Link To Product   |   More Products By This Company


Click on an image to see larger size image ...



Input :   AC100-240V (worldwide use)
Output :   DC 19V 4.74A
Power :   90W
Internal Diameter :   5.0mm
External Diameter :   7.4mm


Input: AC100-240V (worldwide use)
Output: DC 19V 4.74A
Power: 90W

Connecter size:
Internal Diameter: 5.0mm
External Diameter: 7.4mm
With smart-pin inside

* Standard output Laptop AC Power Adapter/Charger with Power Cord.
* Enables you to operate your notebook or charge the battery from electrical power outlets.
* Full protection for the notebook computers.
* If you are running your computer on AC power with a battery installed, this adapter charges the battery (if needed) and maintains its charge.
* When the system is off, the AC adapter will charge the battery and then maintain its charge.
* The best replacement for the original product. Full 1 year warranty!
* Different wires for option to meet your local standard.
* All of our products carry a 100% satisfaction guarantee.

Installation instructions
1, Insert the output of the HP power cord plug into adapter input
2, Input power line access to public electricity
3, Insert adapter output interface into the notebook computer's power supply interface
4, Open the notebook computer to use

Before using the HP Power Adapter, please check the adapter's voltage and current compliance with the requirements of notebook computers.(Adapter output current >= notebook rated current. Adapter output voltage and notebook voltage deviation <= +/- 5%).
Detection of the output interface adapters, and notebook computer power interface can be used perfectly matched.
Adapter to be kept in cooling well-ventilated place when work

Selecting the correct HP ED495AA Power Adapter For Your Laptop

When your HP ED495AA Power Adapter is not working, you should consider purchase a new one for replacement.
Before purchasing a right HP ED495AA Power Adapter, there are several things you should take into consideration.

Check the voltage & current of your original HP AC Adapter. Turn your laptop over and look for a label, sticker or writing which shows the voltage and current, it should look something like the examples below. The voltage figure will have a "V" after the number i.e 19V and the current will have a "A" or "mA". i.e 3.15A. You can also find these shown on your original HP ED495AA Power Adapter if you have it. The Voltage must be within 10% of your original HP AC Adapter Voltage. The Amps may be higher but they cannot by lower. For example, If the wattage requirement for your laptop is lower than the 60W or 90W output of the adapter, it will not damage your laptop, your laptop will only take the amount of power it requires. If your laptop needs 45W, then either the 60W or 90W will work OK. If your laptop needs 80W then you will need the 90W one as the 75W one will not be powerful enough.
Make sure the connection fits the port in your computer where it is to be plugged in. The voltage and output current of the laptop adapter will not matter if it is not able to be connected. Usually, there are 2-prong and 3-prong for selection. If ordering online or if you do not have your computer, it is advisable to check this out as soon as possible.
If in doubt please email us on our contacts page.


Hewlett-Packard, ED495AA, , AC100-240V, DC 19V 4.74A,

Disclaimer: Submitters of product listings are solely responsible for their content. PRLog can't be held liable for the contents of the product listings.   Report Abuse

Like PRLog?
Click to Share