Model 7245-ESL 2-Channel RS530 & Fiber Optic Secure/Non-Secure Switch

The PathWay® Model 7245-ESL Dual Channel RS530 and ST Duplex (1300nm wavelength) Fiber Optic Secure/Non-Secure switch with Cutoff position provides two channel switching in a low profile, 19-inch 1U rack unit.

Contact   |   Link To Product   |   More Products By This Company

Images

Click on an image to see larger size image ...

Specifications

Details

Model 7245-ESL Dual Channel RS530 Switch and Fiber Optic ST Duplex Secure/Non-Secure Switch w/Cutoff

The PathWay® Model 7245-ESL Dual Channel RS530 and ST Duplex (1300nm wavelength) Fiber Optic Secure/Non-Secure switch with Cutoff position provides two channel switching in a low profile, 19-inch 1U rack unit.

Channel One allows the user the capability of sharing a single DB25(F) interface device connected to the Common port among two other DB25 (M) devices connected to the SECURE and NON-SECURE DB25 ports.

Channel Two allows the user the capability of sharing a 10/100 Base-T device connected to the Common port among two ST Duplex (1300nm wavelength) Fiber Optic devices connected to the SECURE and NON-SECURE Fiber Optic switch ports. Both channels allow the user to set the switches to the Secure OffLine CUTOFF position, which stops any and all data throughput for the switch.

The network switch may be controlled locally by manually operating the front panel pushbuttons or remotely from the DB9 Control port located on the rear of the unit using either contact closure or an RS232 command interface. The front panel LED displays indicate the respective switch position and unit power status.

All ports (SECURE, NON-SECURE, and COMMON) for each switch are transparent to all data going through that switch. If power to the Model 7245-ESL is removed, both switches will automatically move to the CUTOFF position. When power is restored, each switch will move to the programmed default position.

Features:

Both Channels offer SECURE / NON-SECURE / CUT-OFF switch positions with remote control.
Channel One is 530 compatible. All 25 pins switched.
Channel Two is Fiber Optic ST Duplex, multimode. Wavelength 1300 nm, fiber size 62.5/125 micron, 100 Meg data rate.
Remote switching via DB9 Remote port on rear panel.
Local switching via two front panel pushbuttons.
Local switch change sends ASCII text over the RS232 interface to notify the user of the new switch position.
All ports are located on the rear panel.
Status LED's on the front panel indicate the switch position & power status.
Either channel can be set to CUTOFF position, which stops any and all data throughput for the switch.
Unit mounts in standard 19" equipment rack, 1U space.

Specifications:

Channel 1 Port Connectors: (3) DB25 (M/M/F) connectors labeled SECURE, NON-SECURE and COMMON, respectively.
Channel 2 Port Connectors: (2) Fiber optic ST Duplex connectors labeled SECURE and NON-SECURE, (1) RJ45 (F) connector labeled COMMON.
Front Panel Controls: (2) Manual pushbuttons allow local switch of channels 1 and 2.
Remote Control: DB9 female connector on rear panel accepts contact closure or RS232 serial data.
Local Display: (6) LEDs on front panel display switch position and power presence.
Power: 115 VAC, 60 Hz wall mount power supply.
Dimensions: 1.75" H x 19.0" W x 8.0" D.
Weight: 4.5 lbs.

Tags

RS530 switch, Fiber Optic Switch, fiber switch, Secure Switch, 2-channel switch, ST duplex, Cutoff Switch, Contact Closure, Network Switch, Data Switch