Click to Share

Model 6283 LC Duplex AB Switch with Telnet Remote Control

Model 6283 LC Duplex A/B Switch allows a device connected to the COM port access to the A or B port. Control via pushbutton or remotely from the RJ45 Remote Control port with Telnet commands.

Manufacturer - Electro Standards Laboratories
Model # - 6283
SKU - 306283
Submitted By - Electro Standards Laboratories (Manufacturer)
Country - United States
Category - Fiber Switch : A/B Switch : LC Duplex

Contact   |   Link To Product   |   More Products By This Company


Click on an image to see larger size image ...

M6283 LC Duplex A/B Switch with Telnet remoteFiber Cables for Model 6283 and all applications


Wavelength :   1310 nm
Fiber Size :   62.5/125 micron
Port Connectors :   (3) LC Duplex: A, B, and COMMON
Pushbutton Control :   (1) Allows selection of switch position
Red LED Display :   (2) Switch position and power status
Supervisory Remote :   (1) RJ45, 10/100BASE-T LAN Ethernet
UL Approved Power Mod :   120VAC, 60Hz supplies 12VDC 500mA
Dimensions: Rackmount :   19"W x 1.75"H x 8"D (48 x 4 x 20 cm)
Weight :   Approximately 4.5 lbs. (2.04 kg)


QuickSwitch® 6283Single Channel LC Duplex A/B Switch with Telnet Remote
IP Addressable For Critical Network Alternate-Path Switching!

The QuickSwitch® Model 6283 Single Channel LC Duplex A/B Switch with Telnet Remote allows a device connected to the COM port access to the A or B port. The switch may be controlled locally by manually operating the front panel pushbutton or remotely from the RJ45 Remote Control port located on the rear of the unit. The RJ45 Remote port provides control through telnet commands and allows the user to both control and monitor the switch position remotely.


IP Addressable.
The switch ports are transparent to all data.
Switch maintains position on power loss and continues to pass data.
Front panel pushbutton control.
Control of the switch position from a 10/100Base-T LAN Ethernet environment.
Remote Control Telnet command interface that allows the user to control switch position, lockout front panel operations and obtain switch status.
Remote control of the switch through the telnet command interface is password protected.
Front panel LED's for display of current position and power status.
MEMS-based mirrors/prism switch technology supports Gigabit data rates.
All A, B, and COM ports are LC, Multimode, 62.5/125 micron, and support a wavelength of 1310nm.
Custom length rigorously tested and certified LC fiber optic cables available for your switch installation.


WAVELENGTH: 1310 nm.
FIBER SIZE: 62.5/125 micron.
PORT CONNECTORS: (3) LC Duplex connectors labeled A, B, and COMMON.
CONTROL: (1) Pushbutton allows selection of switch position.
DISPLAY: (2) Red LED's display switch position and power status.
SUPERVISORY REMOTE PORT: (1) RJ45 (F) connector accepts 10/100 BASE-T LAN Ethernet (TELNET command interface).
POWER: UL approved 120VAC, 60 Hz wall mount power module supplies 12VDC 500mA to the unit.
DIMENSIONS: Rackmount, 19.0" W x 1.75" H x 8.0" D (48.3 x 4.4 x 20.3 cm)
WEIGHT: Approximately 4.5 lbs. (2.04 kg)

Option: Wide Range Power Supply: (Cat No. 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50/60Hz in place of the standard 115 VAC or 120 VAC, power module. Ideal for international applications.

QuickSwitch® is a registered trademark of Electro Standards Laboratories.

QuickSwitch® Fiber Optic Switches are available in many configurations: auto fallback, switch/converters, multimode & single mode, and secure off-line positions. Check out our complete line of QuickSwitch® fiber optic switches.

For custom fiber optic network switches contact our friendly sales support staff at 401-943-1164; or email:


, , , , , , , , ,

Disclaimer: Submitters of product listings are solely responsible for their content. PRLog can't be held liable for the contents of the product listings.   Report Abuse

Like PRLog?
Click to Share