Solar collector

758kWh/m2/year energy gain at Wurzburg, Germany - Keymark Certified in Europe; AUS/NZ certified;individually serial numbered for guarantee;Versatile and easy to install; Functions well in cold climate; Extremely durable;

Contact   |   Link To Product   |   More Products By This Company

Specifications

Details

please visit www dot cibsolar dot com. or send us email to info at cibsolar dot com for more information.

U-16 collector uses the TB-I tube as the absorber tube, each glass tube is fitted with an aluminum contact fin which serves to be the heat transfer contact and also fixes the copper pipe against inner wall of the glass tube. The copper pipe is formed in an “U” shape, within which the collector fluid absorbs and transfers the heat to the collector header.

U-16 collector header comprises two separate copper pipes, each one has been welded to one end of the “U” copper tube, and the pump selection ensures the optimum thermal transfer of the whole system. The header is insulated with polyurethane foam and encased with an UV stabilized galvanized steel sheet.

U-16 collector is mostly suitable to be used in split-up systems; the collector can be fixed on a flat roof, tile roof, or corrugated iron sloped roof.

U-16 collector
- copper pipe with the shape of u;
- within the copper pipe flows heat transfer fluid;
- higher heat gain, lower heat loss;
- easy to install

hp-16 collector
- copper gravity heat pipe with heat transfer liquid sealed inside the heat pipe;
- frost protection;
- operation in close-loop and open-loop system;

w-56 collector
- water flows in glass tube;
- thermosyphon operation;
- good thermal performance and low cost;
- suitable for large project application

Tags

solar, solar thermal, solar heating, solar collector, vacuum collector, evacuated collector, U pipe, heat pipe