Click to Share

4294 4-Way Simplex Fiber Switch, Threaded FC Connectors, 100/140 Graded Index

Model 4294 allows a fiber optic device connected to its FC Simplex COMMON connector to access any of four fiber optic networks connected to the A, B, C or D ports. Upon power loss, Model 4294 changes to default position and continues to pass data.

Manufacturer - Electro Standards Laboratories
Model # - 4294
SKU - 304194
Submitted By - Electro Standards Laboratories (Manufacturer)
Country - United States
Category - Fiber Switch : 4-Way Switch : Simplex Fiber

Contact   |   Link To Product   |   More Products By This Company


Click on an image to see larger size image ...

QuickSwitch 4294 4-Way Simplex Fiber Optic SwitchFiber Optic Cables Available for all Interfaces


Wavelength :   Optimum at 1300nm
Connectors :   (5) FC Simplex, A/B/C/D/COMMON
Controls :   (1) Pushbutton selects A/B/C/D
Red LED Display :   (4) switch position, power status
UL Approved Power Mod :   120VAC / 60Hz wall mount supply
Dimensions :   1.75"H x 8"D x 19"W (4 x 20 x 48 cm)


QuickSwitch® 4294 Remotely Controllable FC Simplex A/B/C/D, all optical network switch, is designed with fiber optic mirror technology. The signal is received by the unit as an optical signal over the fiber strand, is redirected by mirror mechanisms, and leaves the unit as an optical signal over a fiber strand (OOO). Optimum wavelength is 1300 nm.

QuickSwitch® 4294 allows a fiber optic device connected to the unit's FC Simplex COMMON connector to access any of the four fiber optic networks connected to the A, B, C or D ports. Switch position can be changed via the front-panel pushbutton, or from an RS232 Serial Remote Port located on the rear panel.

QuickSwitch® 4294 Operation:
QuickSwitch® 4294's FC Simplex ports are transparent to all data. Front-panel LEDs indicate the switch position. Position status can also be ascertained from the Remote port connector. Remote switching is accomplished via the RS232 Serial Remote port located on the M4294 rear panel.

The QuickSwitch® 4294 has Switch Position Memory. When power is lost, the QuickSwitch® 4294 automatically changes to its default position and will continue to pass data.

QuickSwitch® Model 4294 Switch Features:

Optical Scalability.
Bit-Rate and Data Transparent.
Service/Protocol Transparent.
A/B/C/D/COMMON FC Simplex, UPC, not angle polished Rear-Panel Connectors.
Fiber Strand interface: 100/140 micrometer graded index multimode fiber.
Front-Panel Pushbutton selects A, B, C, or D positions.
Front-panel LEDs display switch positions and power status.
Remote control via RS232 serial remote port on rear panel.
MEMS-Based Multimode Mirror Switch supports Gigabit data rates.

QuickSwitch® Model 4294 Switch Specifications:
WAVELENGTH: Optimum at 1300 nm.
CONNECTORS: (5) FC Simplex Fiber Optic rear-panel connectors, A/B/C/D/COMMON.
CONTROLS: (1) Front-panel pushbutton selects A/B/C/D.
DISPLAY: (4) Front-panel red LEDs display switch position and power status.
POWER: UL approved, 120VAC / 60 Hz wall mount supply.
DIMENSIONS: 1.75" H x 8" D x 19 "W
Fits standards 19: rack .

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.


, , , , , , , , ,

Disclaimer: Submitters of product listings are solely responsible for their content. PRLog can't be held liable for the contents of the product listings.   Report Abuse

Like PRLog?
Click to Share