Edelbrock 1587 E-Force Competition Supercharger Kit 2010 Ford Mustang 4.6L 3V

Special Offer! Free Shipping,$75 Gift Card, and Autographed Doug Herbert T-Shirt when Purchasing Select e-Force Supercharger Kits with PromoCode:EFORCE

Contact   |   Link To Product   |   More Products By This Company

Specifications

Details

Edelbrock 1587 E-Force Competition Supercharger Kit for 2010 Ford Mustang 4.6L 3V
Special Offer! Get Free Shipping, Free $75 Gift Card, and an Autographed Doug Herbert T-Shirt when Purchasing Select e-Force Supercharger Kits with Promo Coupon Code: EFORCE

Edelbrock E-Force Competition Supercharger kits include all of the essential components that a racer or tuner shop would need to build a custom supercharger for racing applications. Our competitors kits often require that you buy a complete system and then remove the components that would not be utilized on a custom build. The Edelbrock E-Force Competition kits give you the option of choosing the equipment you want when building a custom supercharged Mustang. This kit includes the essential supercharger package components with selectable options based on your purpose built needs - from our Competition Air Intake Systems to fuel injectors (available in 41 lb/hr and 60 lb/hr), pulleys (available in 3.5", 3.25", 3.0" and 2.75") and much more. Finally, finish off your custom installation with a set of Edelbrock E-Force Coil Covers #EDE41133.
Engine Specs: Stock 4.6L block, Kellogg 3.8" stroke forged steel crankshaft, Manley 5.85" forged steel H-Beam rods, CP forged Aluminum pistons, stock cylinder heads ported by EEI, Comp Cams VSR “Serious Street” camshafts and BHJ SFI-Approved 7.5" Damper and 8.9:1 compression

Edelbrock is excited to announce the release of their E-Force Supercharger system for 2010 Ford Mustangs equipped with a 4.6L 3V (#1582). Based in large part on the existing supercharger for '05-'09 Mustangs, this new kit will allow the 2010 Mustang to produce an impressive 466 HP and 439 ft/lbs of torque with very low boost. This design is engineered and manufactured by Edelbrock and features an Eaton® Twin Vortices Series (TVS®) GEN VI rotor assembly - the same internals used on the new Corvette ZR-1.
The supercharger assembly is integrated into Edelbrock's unique intake manifold for a truly seamless design with minimal components. The intake features 15" long runners for maximum low-end torque and an integrated bypass valve that helps reduce parasitic loss under light throttle, which improves mileage potential. Keeping the air cool is a 110 square inch high capacity air to water intercooler - the largest of its kind available on the market today - and full face low temp heat exchange. A new injection molded high-flow air-box cover keeps the 2010 50-state emissions legal (EO pending). The assembly is finished with a matching set of coil covers uniquely styled to give your engine compartment a custom look.
This complete Edelbrock E-Force supercharger kit includes everything you need to bolt it on under the hood of a 2010 Mustang 4.6L 3V, including supercharger/manifold assembly, air inlet with 85mm throttle body, injection molded air-box cover, fuel injectors, air-to-water intercooler, coil covers and handheld flash programmer to properly tune the factory ECU for the added power. Edelbrock offers an available 5-Year/60,000 mile warranty and 50-State emissions legal EO is pending.
The supercharger is also available as a competition kit #1587. Intended for purpose built race cars, the competition kit is supplied with only essential components and does not include the programmer, injectors, coil covers or primary pulley. Four pulley sizes are available, in diameters from 3.50" to 2.75" depending on the desired boost level, as well as a competition air intake system that eliminates the stock air box for improved air flow. Please note that these parts are only intended for use with the competition kit, and will void the E.O. certification of the #1582 street-legal kit.

Features Include:
* More horsepower per psi than any other Mustang system on the market
* 2300cc (140 cubic inch) Eaton® TVS® GEN VI rotor assembly
* Unique intake manifold design with 15" long runners for increased low-end torque
* 100,000 mile self-contained oiling system
* Installs under the stock hood while maintaining factory accessories
* Complete package includes supercharger/intake assembly, air inlet with 85mm throttle body, fuel injectors, air-to-water intercooler, and flash tuner with proper calibration
* Available 5 Year/60,000 mile warranty
* The most efficient system available - 466 HP and 439 ft/lbs. of Torque with low boost!
* Made in USA for absolute quality and performance

About Edelbrock
Founded in 1938, Torrance-based Edelbrock Corp. is recognized as one of the nation's premier designers, manufacturers and distributors of performance replacement parts for the automotive and motorcycle aftermarkets.



This part is shipped via truck freight, additional shipping charges will apply. Multiple truck freight parts on an order may increase the shipping amount.

Tags

ford, mustang, supercharger, Kit, doug, herbert, edelbrock, e-force, competition, 2010