E1 to V.35 Interface Converter

SPC-1035 Series E1/V.35 interface converter is developed based on its proprietary purpose-built integrated circuits. It is a N×64K (n = 1-32) E1 to V.35 interface converter with the ultra-large-scale integrated circuits as its core.

Contact   |   Link To Product   |   More Products By This Company

Specifications

Details

Introduction

SPC-1035 Series E1/V.35 interface converter is developed based on its proprietary purpose-built
integrated circuits. It is a N×64K (n = 1-32) E1 to V.35 interface converter with the ultra-large-scale
integrated circuits as its core, which is applicable to the data networks based on N×64K V.35 interfaces.
E1/V.35 interface converter can also provide centralized rack structure and complete network management
functions.

Features

◆ Adopt large-scale chip, simple circuit, low power consumption and high reliability;◆ Provide 1 route of N×64K V.35 interface (N = 1-32) and conversion of FE1/E1;◆ Provide 1 E1 digital port, impedance: 75Ω/120Ω;◆ Provide a management interface for centralized monitoring. It can also manage and control remote offices and support system upgrading if framed;◆ Provide one port of V.35 interface (N*64K, support all the V.35 clock mode); ◆ Provide the Test and Control switch group;◆ BERT Test inside;◆ SPC-CONV and SPC-CONC are the advanced PCM equipments;◆ SPC-CONV、KSPC-CONV、SPC-CONC can be applied with SPC-30 series;◆ Applicable in a variety of power supply environments;◆ Small, light, low power consumption, stable and easy for installation

Electrical Features of E1 Interface: l Nominal rate: 2048Kbps, tolerance±50ppm;l Interface code format: HDB3;l Interface resistance: optional between 75Ω(imbalanced) or 120Ω(balanced);l Electrical features of digital interface: conforms to ITU—TG.703 recommendation. l Jitter transfer characteristics: conforms to ITU—TG.823 recommendation;l Input jitter tolerance: conforms to ITU—TG.823 recommendation;l Output jitter: conforms to ITU—TG.823 recommendation;l Level: ±2.37V±10% or ±3.00V±10%

Specifications of 10/100Base-Tx Interface l Interface: 10/100Base-Tx;l Interface specification: conform to IEEE-802.3u;l Interface rate: 10/100M self-adaptive;l Interface connector: RJ-45.

Features of Management Interface and Extended Serial Interface l Interface type: RS-232;l Interface level: RS-232 level;l Interface connector: RJ-45;l Baud rate of management interface: 57600bit/s;l Maximum baud rate of extended serial interface: 19200bit/s.

Electrical feature of V.35 interface: l Interface rate: n×64K;l No traffic control, transparent transmission; l Interface connector: DB25 socket;l Operation mode: optional between DCE and DTE

Power Supply Conditions l DC supply voltage: ±24VDC, tolerance range: +24V±15%, ripple of power supply: ≤120mVp-p;l DC supply voltage: -48VDC, tolerance range: -36V~-72V, ripple of power supply: ≤240mVp-p;l AC supply voltage: 220VAC±20%, 50HZ; tolerance range:90~-264Vl Power consumption: ≤ 10W.

Operation Conditions l Ambient temperature: 0℃~45℃;l Relative humidity: ≤90% (at 35℃);l Atmospheric pressure: 86~106Kpa

Dimensions 200×145×35 mm

Tags

telecommunication, converter, Interface Converter