Click to Share

Thomas Aaron Billiards Celtic Pool Table

New, Celtic Pool Table by: Thomas Aaron Billiards. True 1" inch Certified Professional Grade three piece slate

Manufacturer - Thomas Aaron Billiards
Model # - Celtic
Submitted By - Island Heat Imports, Inc. (Retailer, Reseller)
Country - United States
Category - Sports : Pool Tables : Indoor Home Goods

Contact   |   Link To Product   |   More Products By This Company


Table :   8 foot
slate :   1 inch
Designer table :   Celtic
Built :   BCA
celtic :   billiard table


New, Celtic Pool Table by: Thomas Aaron Billiards.

True 1" inch Certified Professional Grade three piece slate...
This Fabulous Table can be yours for $ 1,495.00. Free USA Shipping

This table should be Professionally installed.

Thomas Aaron Billiard table designed and manufactured custom tables to meet the exacting standards of professional billiard players, celebrities and a select clientele.

Experience the fine craftsmanship evident in this Celtic Pool Table with it’s richly grained hardwoods, exotic burls and hand carved details, all gracefully proportioned and thoughtfully executed on each design. Inspired and created to reflect the timeless appeal of classic furniture styles, this unique billiard table will complement today's home furnishings.

Tables are new and have been sitting in a warehouse for 7 years. They are the original Celtic Pool Table by: Thomas Aaron Billiards.

Specifications: One New Celtic Pool Table complete:

8’ Slate Pool Table

44” x 88” Playing Surface Dimensions

101.5” x 57.5” x 32.2” Assembled Outside Dimensions

Built to BCA (Billiard Congress of America) specifications.

The table itself weighs 329 lbs. and the slate weighs 500 lbs. for a total of 829 lbs.


The base frame is constructed of solid kiln dried hardwoods and select laminated wood veneers. The cross bracing is the backbone of the table, and is made from solid timber 1¾” x 4”, through bolted at 10 points for unitizing the cabinet for maximum strength and stability. The insides of all our cabinets are stained and sealed to lock out moisture. Both the outside and inside of the cabinet have equally applied sealers to keep wood frame stable.


Multi-layer, hand applied glaze finish with highlighting, only found on the finest furniture. The finish is hand applied by furniture finishing experts which brings out the natural beauty of the wood grain, unlike the standard dull finish found on most pool tables. Some side rails on tables could have some clouding on finish.


Block lamination provides superior stability and guarantees no warping or twisting. The same hardwood is used on entire rail and sub rail.. Aprons are permanently bonded for unsurpassed straightness and strength for years of accurate play.

Less vibration for more accurate ball rebound - 3/8" diameter bolts are threaded into an Iron Jaw ™ nut plate. This gives the rail-to-table joinery approximately 75% more downward holding strength than standard 5/16" t-nuts.

*NO DEAD SPOTS!* - The slots where the nut plates are inserted into the rails are plugged with wood blocks then glued and nailed, to give solid surface backing to rubber cushions.

Uniform cushion height for accurate playability - A relief groove is cut in the sub rail to provide a place for the installer to staple the cloth. This is critical due to the fact that the rail cloth and staples can bunch up under the rail and cause varying cushion heights. The cloth stapling relief groove helps keep the cushion height uniform along each rail for accurate playability.


Standard sights are genuine mother of pearl with abalone inset diamonds, this is an upgrade from other manufacturers.


Full K-66 profile: BCA specified for the industry and tournaments for almost a century. Made with an exclusive formulation from 100% high quality natural gum rubber with no additional fillers. UV degeneration and oxidation inhibitors are blended into the rubber formulation for years of accurate play. A canvas is vulcanized to the top surface of the cushion, in order to control accuracy of ball deflection. The canvas is also vulcanized to the back of the cushion to strengthen the bond to the rail.


Every rail surface is highlighted with a unique furniture finishing glaze, then hand rubbed to bring out the luster of the natural wood grain. Rail surfaces are multi-step coated with a highly durable scratch resistant top coat that is applied to give a long lasting finish.


True 1" inch Certified Professional Grade three piece slate. Diamond honed with an over sized 60" grinding wheel for a truly accurate playing surface. Slate surface is computer controlled with a tolerance to 1/10,000 of an inch.


Finest saddle grade leather. Leather Bucket Pockets have extra thick leather around the collar to prevent warping or curling. Bottom of pockets are stitched, rather than stapled, for added strength.


Table does not come with cloth. They do not have the cloth you will have to choose the color of the cloth you would like and order as an accessory.


, , , ,

Disclaimer: Submitters of product listings are solely responsible for their content. PRLog can't be held liable for the contents of the product listings.   Report Abuse

Like PRLog?
Click to Share