CellMite 4327 Digital Signal Conditioner Board for Strain Gage Sensors

M4327 embedded digital signal conditoner board connects to a strain gage transducer and simultaneously generates a serial output for connection to a PC, a scalable +/-10V analog output for interface to DAQ, a 16-character auto-identifying display.

Contact   |   Link To Product   |   More Products By This Company

Images

Click on an image to see larger size image ...

Specifications

Details

Electro Standards Laboratories, Cranston, RI, announces the Model 4327 CellMite Board with Auto-Identifying Display Embedded Digital Signal Conditioner for Strain Gage Sensors. The Model 4327 connects directly to a standard strain gage transducer and simultaneously generates a serial output for direct connection to a PC, a scalable +/-10V analog output for interface to data acquisition systems, and a 16-character auto identifying display for direct readout viewing.

The Model 4327 has on-board storage for three calibrated sensors, each with integrated 6-point calibration and independent user-specified display setup parameters. When a TEDS-tag capable sensor is connected to the unit, that sensor is immediately identified by the Model 4327 and its stored calibration data and display configuration are automatically loaded. If that sensor is removed and another TEDS-Tag sensor is connected, then its calibration data and display data are automatically loaded.

The Model 4327 can be fully operated with a computer or simply setup by a computer and then used as a stand-alone intelligent digital signal conditioner with auto-identifying analog and alphanumeric display outputs.

The Model 4327 features an intelligent 16-character backlit alphanumeric display. The wide range numerical readout features 6 full digits of display plus sign indicator and decimal point along with a unit of measure label and channel identifier. The Model 4327 automatically converts between a variety of scientific units including Lbs, Kg, cm, mm, and mV/V and can output these to display. The location of the decimal point and unit of measure are setup via software but the computer is not required during operation.

The CellMite Model 4327 has a multi-drop RS232/RS485 serial port that allows for connection of multiple units in a serial network configuration. This compact unit is ideally suited for in-situ transducer conditioning and distributed process measurements. The Model 4327 provides OEM user and system integrators with an affordable and complete strain gage-to-PC solution with intelligent display readout.

For more information contact Electro Standards Laboratories, www.ElectroStandards.com, eslab@ElectroStandards.com, or 401-943-1164.

Tags

Signal Conditioner, strain gage, Strain Gauge, sensors, transducers, conditioner board, Model 4327, CellMite, DSC, data acquisition